Basic Boat Info
Dimensions
Engines / Speed
- Make: Yamaha
- Model: LF150XCA
- Fuel: Unleaded
- Engine Power: 150hp
- Type: Outboard
- Propeller Type: 3 BladeStainless Steel
- Year: 2023
- Engine Hours: 17
- Make: Yamaha
- Model: F150XCA
- Fuel: Unleaded
- Engine Power: 150hp
- Type: Outboard
- Propeller Type: 3 BladeStainless Steel
- Year: 2023
- Engine Hours: 17
Tanks
Other
Contact
Office
2555 NE Catawba Rd.
Port Clinton, OH, US, 43452
Tel:(419) 797-2300
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The popular sport family includes the S 268; featuring the timeless styling, luxury finishes and modern amenities that Pursuit is known for. Foldaway seating in the cockpit can quickly transform the area from a social zone to fish-ready with port and starboard fishboxes, livewell and plenty of room for both your crew and your gear. Take the helm and discover the ease of operation and ergonomically-designed controls that make the S 268 a pleasure to run. With an LOA of 27' 4", twin Yamaha® engines and our oversized sport-style hardtop, this boat is going to take you places.
- Pursuit® Protection Plan:
5 Year Hull and Deck Structural Warranty
5 Year Blister Free Warranty
2 Year Limited Warranty - Pursuit Fresh White Gelcoat
- Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
- 3 Ply Resin Infused Composite Transom System
- Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
- Foam Filled Structural Grid
- Bronze Thru Hull Fittings Below Water Line
- Chrome over Bronze Thru Hull Fittings Below the 7 Degree Heel Line
- Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
- Bronze Garboard Drain
- Trim Tabs, Lenco Electric with Auto-Retract
- Bow Eye, 1/2" 316L Stainless Steel
- Stern Eyes (2), 1/2" 316L Stainless Steel
- Basic Floatation
- Integrated Transom Platform Extensions Outboard of Engine
- Boarding Ladder, 3-Step Telescopic, Mounted in Hull Platform
- Self-Draining Rope Locker
- Anchor Scuff Plate, 316L Stainless Steel
- Horn, Electric, with Oval Stainless Steel Cover
- Dedicated Transducer Location
- Hull and Deck Joint Mechanically Fastened
- Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
- Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area
- Flush Mounted Integral Anchor Locker with Fiberglass Lid
- Anchor Roller Chute/8" Cleat, 14lb Galvanized Plow Style Anchor and Rode (150' of 1/2" 8 Plait including 10' of ¼" G4 Chain)
- Cleats, 316 Stainless Steel, 8" Pop Up (2) Stern, (2) Spring and (2) Bow
- Molded Recessed Hatches with Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
- Molded Transom Walkthrough with Hinged Transom Door, 316L Stainless Steel Latch and Positive Catch
- Self-Draining Cockpit with Bronze Ball Valve at Hull Side
- Bow Grab Rails, 316L Stainless Steel (Port & Starboard)
- Transom Grab Rail, 316L Stainless Steel, (Port)
- Navigation Lights, LED, 2 Mile
- Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
- Molded Forward Bow Seating with Insulated Storage Below and Removable Cushions
- Forward Facing Seat for two on Front of Console with Armrests
- Helm Seating with Split Bolster, Outboard Foldable Armrests and Fore/Aft Adjustment
- Molded Helm Seat Console with Drink Holders (2), Rod Holders (2), Dedicated Tackle Storage Trays (5), Storage Drawers, Bucket/Soft-side Cooler Storage, Cutting Board and 12V Main Distribution Panel
- Aft Cockpit Machinery Access Hatch
- Forward Cockpit Machinery Access Hatch
- Fresh Water Washdown with Chrome over Brass Pull out Sprayer
- Raw Water Outlet in Cockpit with Quick Connect Fitting and 25' Hose
- Drink Holders, 316L Stainless Steel, (4) Bow, (2) Helm, (2) Helm Seat Module and (4) in Gunwale
- LED Cockpit Accent Lights (5)
- Fire Extinguisher (Under Starboard Gunwale)
- Rod Holders (6), Stainless Steel, (4) in Gunwale and (2) in Helm Seat Module
- Lighted Oceana Blue 28 Gallon Recirculating Insulated Livewell with Acrylic Lid
- Under Gunwale Rod Storage (4) with Reel Pads (Port and Starboard)
- Fish Boxes (28 gallons each), In-Floor, Insulated and Diaphragm Pump with Overboard Discharge (Port and Starboard)
- Vertical Rod Holders (5), Stainless Steel, in Transom
- Dedicated Tackle Storage Trays (5) and Drawers (2)
- Bait Prep Cutting Board
- Molded Fiberglass Hardtop
- Powder Coated Structural Hardtop Supports with Grab Rails
- Overhead Storage Box
- Four (4) Rod Holders
- Custom Stainless Steel Ratcheting Anchor/Stern Light with Burgee Rings and USA Flag
- Two (2) Tri Color LED Lights
- Fore and Aft Facing LED Spreader Lights
- Removable Stamoid® with Makrolon® Windscreen (3-piece)
- Dedicated Locations for Radar, Outriggers, VHF and FM Antennas
- Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface and Fixed Fiberglass Footrest
- 316L Stainless Steel Steering Wheel on Sport Tilt Plus Helm
- 12V Panel with Illuminated Carling® Rocker Switches
- 316L Stainless Steel Helm Drink Holders (2)
- Compass
- Trim Tab Control Panel and Indicator
- 12V Outlet and Dual USB Charger
- Fire Extinguisher (Under Port Gunwale)
- Two Piece Fiberglass Door with Gasket and 316 Stainless Steel Automotive-Style Locking Latch
- Molded Fiberglass Interior
- Console Entry Steps
- Manual Porcelain (Freshwater) Head with 6 Gallon Holding Tank, Macerator Discharge Pump, 316L Stainless Steel Deck Pump-out Fitting and Bronze Thru Hull Fitting with Seacock
- Vanity with Stainless Steel Sink and Freshwater Faucet
- Access to Fresh Water Pump with Filter
- Vanity Mirror
- Integrally Switched 12V Overhead Light
- Storage Hooks (3)
- Dedicated Towel Storage Areas (2)
- Toilet Tissue Holder
- Fire Extinguisher
- UL® Rated Fully Tinned, Color Coded Copper Wire
- Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
- Custom In-House Built, One-Piece Electrical Harness with Waterproof Connectors and Chafe Protection
- Powder Coated, Aluminum, Screen Printed (Front and Back) Battery Switch and Breaker Panel
- Bonding System: Thru Hull Fittings Below Water Line, Trim Tabs, Zinc Anode and Garboard Drain
- Two Battery System: Port Engine (1) and Starboard Engine/House (1)
- Grounding Bus Bar
- Electronics Fuse Block
- 12V Outlet and Dual USB Charger
- Molded Interior White Gel Coat
- Molded Hatch with Gasket and Stainless Steel Gas Spring
- Molded Bilge Sump Area
- Two (2) 1500 GPH Bilge Pumps with Electronic Switches and Stainless Steel Clad Thru Hull Fittings
- 1100 GPH Tournament Series Livewell Pump, Seacock and Thru Hull Fitting
- Pressure Sensing Raw Water Pump with In-Line Filter
- Fish Box Diaphragm Evacuation Pump with Selection Valves
- EPA Compliant Lined 139 Gallon Rotomolded Fuel Tank with Engine Pickups, Shutoff Valves, Digital Level Indicator and Deck Fuel Fill Plate
- Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
- Two (2) Yamaha® Water Separating Fuel Filters with Primer Bulbs
- 20 Gallon Water Tank and 316L Stainless Steel Deck Fill Plate
- Premium Sea Tech Color Coded Water Hose System with Mechanically Crimped Ends
- Pressure Sensing/Variable Speed Water Pump with In-Line Filter
- Faucet in the Head
- Cockpit Shower with Hose
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.